Double-Sided PEI Print Bed Plate for Bambu Lab A1 Mini – 184mm × 184mm

Upgrade your Bambu Lab A1 Mini print bed with the OMG Glacier double-sided PEI printing platform. Engineered for superior first-layer adhesion, warp-free prints, and a premium smooth surface finish — without the hassle of glue sticks or hairspray.

Compatibility

• for Bambu Lab A1 Mini (184mm × 184mm build plate)

Specifications

• Size: 184mm × 184mm
• Material: PEI (Polyetherimide) double-sided coating
• Brand Platform: OMG Glacier
• Supported Filaments: PLA, PETG

Recommended Print Temperature (Bed)

• PLA: 30–35°C
• PETG: 55–65°C

⚠️ Important: Incorrect bed temperature settings can cause excessive adhesion between the printed part and the bed surface. Always test PLA parts at room temperature first. Excessive adhesion may damage the PEI coating.

Key Features

• ✅ Superior First-Layer Adhesion: Minimizes warping and first-layer detachment for consistent print success
• ✅ Double-Sided Design: Two usable surfaces extend the service life of the plate
• ✅ Smooth Bottom Surface Finish: Fine-texture PEI coating produces a nearly smooth, high-quality finish on the underside of prints
• ✅ Easy Part Release: Prints release cleanly at room temperature — no tools required
• ✅ No Adhesives Needed: Eliminates the need for glue sticks, hairspray, or release agents
• ✅ Direct Drop-In Fit: 184mm × 184mm size matches Bambu Lab A1 Mini build plate exactly

Installation Tips

1. Ensure your A1 Mini build plate is clean and free from debris before installing.
2. Place the PEI plate onto the magnetic build plate surface — it will hold securely via the built-in magnetic base.
3. Level the print bed as per Bambu Lab’s calibration process before your first print.
4. For best results, lightly clean the PEI surface with isopropyl alcohol (IPA) before each print session.

Eparts Channel is not responsible for any damage caused during installation or use.